Assessing seed desiccation responses of native trees in the Caribbean

New Forests - Native trees from the Caribbean were tested for seed desiccation responses, by adapting the “100-seed test” protocol. Ninety-seven seed lots of 91 species were collected...     

Changes in wettability of wood surface using electron beam irradiation

ABSTRACT

This study deals with the influence of electron beam irradiation (EBI) on the wettability of Norway spruce surface samples. To evaluate this possible effect in detail, the changes in chemistry and wood structure were analysed using the methods of IR spectroscopy and Scanning Electron Microscopy (SEM). The surface wettability was determined by the contact angle measurement method. The results of infrared spectra show decreased relative numbers of available hydrophilic groups (e.g. hydroxyl and carbonyl groups) in the wood surfaces due to the electron beam irradiation. This behaviour is consistent with the values from the surface wettability measurements. Structural differences of the wood surfaces after electron beam irradiation were not detectable. Based on these findings pre-treatment of wood surfaces for industrial usages can be a potential field of application of this technology.     

The role of ear environment in postharvest susceptibility of maize to toxigenic Aspergillus flavus

A kernel screening assay (KSA) was used to assess the genetic and environmental effects on the vulnerability of maize to aflatoxin accumulation. Kernels of 26 inbred lines that had been grown in seven environments, and 190 lines of the Intermated B73xMo17 (IBM) population grown in one location in the United States, were inoculated with a toxigenic strain of A. flavus and incubated in the dark at 30°C for 6 days. Percent kernel colonization (PKC), sporulation and aflatoxin were influenced by the maize genotypes (G), the location (“ear environment” or E) and the GxE interactions. Overall, low broad‐sense heritabilities were observed for PKC, sporulation and aflatoxin. PKC was significantly correlated with sporulation in all environments. Aflatoxin was positively correlated with colonization for two and with sporulation for all ear environments. Higher grain sulphur or magnesium in IBM was associated with less colonization or aflatoxin. Postharvest susceptibility of maize to aflatoxin is thus influenced by factors that are modulated by the ear environment. In a KSA, sporulation could be a proxy test for aflatoxin accumulation.     

Development of colchicine‐induced tetraploid St. Augustinegrass (Stenotaphrum secundatum) lines

St. Augustinegrass is well suited for lawns and commercial landscapes. While many genotypes are cross‐fertile, all cultivars are propagated vegetatively in sod production. To ensure varietal purity, development of sterile triploid hybrids by crossing tetraploid and diploid genotypes has been successfully used in other warm‐season turfgrasses. Applying this model in St. Augustinegrass would be beneficial to sod producers and turf managers who require purity for certification and uniformity for performance, respectively. This study was conducted to develop colchicine‐induced tetraploid lines of St. Augustinegrass. Seeds of cultivar ‘Raleigh’ were treated with four colchicine concentrations at four exposure times. A non‐treated control was included among the treatments. Seedlings that germinated were screened for genome size changes using flow cytometry. Line DSA 13005 and two progeny lines derived through selfing, DSA 16001 and DSA 16016, were corroborated as tetraploids (2n = 4x = 36) through chromosome counts. These lines will be used in future breeding efforts to attempt development of sterile triploid cultivars of St. Augustinegrass.     

Embodied Resources in Fish and Shrimp Feeds

Global averages were obtained for amounts of energy, land, water, wildfish, nitrogen, and phosphorus embodied in aquaculture feed ingredients. These data allowed amounts of these embodied resources to be calculated for typical feed formulations for channel catfish, Ictalurus punctatus; hybrid catfish, I. punctatus♀ × I. furcatus♂; Vietnamese catfish, Pangasius spp.; Atlantic salmon, Salmo salar; rainbow trout, Oncorhynchus mykiss; tilapia, Oreochromis spp.; whiteleg shrimp, Litopenaeus vannamei; and black tiger shrimp, Penaeus monodon. Embodied resource use per m.t. of feed varied among species: energy, 4.90–12.48 GJ/m.t.; land, 0.082–0.312 ha/m.t.; water, 502–1227 m³/m.t.; wildfish, 0–2880 kg/m.t.; nitrogen, 3.08–8.63 kg/m.t.; phosphorus, 1.16–5.62 kg/m.t. These calculations did not account for variations in site‐specific factors related to embodied resources and feed composition and use. But they suggest that reducing feed conversion ratio (FCR) by 0.1 unit for the seven species (species groups) could potentially reduce feed use by around 1.1 million tonne (Mt) while conserving 9.8 million GJ of energy, 270,000 ha of agricultural land, 1.4 billion m³ of freshwater, and 1.24 Mt of wildfish. Reduction of the FCR is a powerful means of lessening farm‐level production costs and negative impacts of feed production and use.     

Evaluation of mechanical properties of jute/glass/carbon fibers reinforced hybrid composites

A study on the tensile and flexural properties of jute-glass-carbon fibers reinforced epoxy hybrid composites in inter-ply configuration is presented in this paper. Test specimens were manufactured by hand lay-up process and their tensile and flexural properties were obtained. The effects of the hybridization, different fibers content and plies stacking sequence on the mechanical properties of the tested hybrid composites were investigated. Two-parameter Weibull distribution function was used to statistically analyze the experimental results. The failure probability graphs for the tested composites were drawn. These graphs are important tools for helping the designers to understand and choose the suitable material for the required design and development. Results showed that the hybridization process can potentially improve the tensile and flexural properties of jute reinforced composite. The flexural strength decreases when partial laminas from a carbon/epoxy laminate are replaced by glass/epoxy or jute/epoxy laminas. Also, it is realized that incorporating high strength fibers to the outer layers of the composite leads to higher flexural resistance, whilst the order of the layers doesn’t affect the tensile properties.     

A genetic linkage map in southern‐by‐spring oat identifies multiple quantitative trait loci for adaptation and rust resistance

We developed 178 recombinant inbred lines from a southern‐by‐spring oat population designated as “TxH.” These lines were genotyped to generate a high‐quality linkage map that resolved 6,902 markers into 21 linkage groups that matched closely with the latest hexaploid oat consensus map. Three major quantitative trait loci (QTLs) affecting heading date were found in locations that are consistent with known QTLs and candidate genes, and two other QTLs affecting heading date were found in novel locations. Five QTLs affecting plant height were found. Both sets of QTLs are responsible for transgressive segregation observed for these two traits. Four QTLs affecting resistance to crown rust, caused by the pathogen Puccinia coronata f. sp. avenae, were identified. Two of these QTLs are consistent with known clusters of rust resistance genes, while two may represent new locations of novel rust resistance genes. A complete set of SNP sequences suitable for generating markers for molecular selection is provided.     

Evaluation of Particle Size Influence on Proximate Composition,Physicochemical, Techno-Functional and Physio-Functional Properties of Flours Obtained from Persimmon (<Emphasis Type="Italic">Diospyros kaki</Emphasis> Trumb.) Coproducts

The aim of the work was to study the influence of particle size in the composition, physicochemical, techno-functional and physio-functional properties of two flours obtained from persimmon (Diospyros kaki Trumb. cvs. ‘Rojo Brillante’ (RBF) and ‘Triump’ (THF) coproducts. The cultivar (RBF and THF) and particle size significantly affected all parameters under study, although depending on the evaluated property, only one of these effects predominated. Carbohydrates (38.07–46.98 g/100 g) and total dietary fiber (32.07–43.57 g/100 g) were the main components in both flours (RBF and THF). Furthermore, insoluble dietary fiber represented more than 68% of total dietary fiber content. All color properties studied were influenced by cultivar and particle size. For both cultivars, the lower particle size, the higher lightness and hue values. RBF flours showed high values for emulsifying activity (69.33–74.00 mL/mL), while THF presented high values for water holding capacity (WHC: 9.47–12.19 g water/g sample). The bile holding capacity (BHC) and fat/oil binding values were, in general, higher in RBF (19.61–12.19 g bile/g sample and 11.98–9.07, respectively) than THF (16.12–12.40 g bile/g sample and 9.78–7.96, respectively). The effect of particle size was really evident in both WHC and BHC. Due to their dietary fiber content, techno-functional and physio-functional properties, persimmon flours seem to have a good profile to be used as potential functional ingredient.